Softing helps you get connected with communications modules for Rockwell Automation controller platforms such as ControlLogix, CompactLogix, SLC-500, and PLC-5. We also have experience with a wide range of network protocols including Ethernet/IP, Modbus TCP/IP, Data Highway, Remote I/O, ControlNet, and Siemens Industrial Ethernet. Softing helps you stay connected with Ethernet cable testers to prove your application speed, troubleshoot cables and networks, and even certify cable installations.
Appliance Transaction Modules
Designed for Enterprise-to-Controller or Controller-to-Controller data exchange. Set-up of tag/array data transfer is done graphically via configuration software. Once completed, the modules alone handle all data exchange - no other software is required.
eATM tManager - Connect ControlLogix PLC to Databases
Connect ControlLogix to databases like Microsoft SQL or Oracle and to Cloud applications with MQTT protocol
tManager® Enterprise Appliance Transaction Modules (eATM®) enable bi-directional data exchange between enterprise databases like Microsoft SQL and CompactLogix PLCs.
Connect CompactLogix to databases like Microsoft SQL or Oracle
tManager® Enterprise Appliance Transaction Modules (eATM®) enable bi-directional data exchange between enterprise systems like Microsoft SQL databases and ControlLogix PLCs. tManager is the preferred PLC in-chassis hardware connectivity solution as compared to PC software-based connectivity solutions such as VB scripting and FactoryTalk Transaction Manager.
Phoenix Digital OCR Ethernet Networking Module
Connect Ethernet PLCs together through Phoenix Digital networking communications modules
The Phoenix Digital OCR is a DIN rail mount module that connects your Ethernet PLCs together and connects PLCs to Ethernet field devices. This industrial networking module is a built-for-purpose OT solution for control engineers. For example, the networking module comes with no configuration software so you can support your PLC and device networking without complicated setup and configuration. The OCR has a redundant fiber backbone for maximum network reliability and uptime. The OCR module supports Ethernet protocols such as PROFINET, Ethernet/IP, and Modbus TCP/IP all at the same time. Boot up time is about 10 seconds, and if a fiber fails, there is 0 convergence time to failover to the redundant fiber. Gone is the complicated setup required for redundant networking using IT based switches.
Phoenix Digital in-chassis Ethernet Networking Modules
Connect Ethernet PLCs together through Phoenix Digital networking communications modules
These Phoenix Digital in-chassis modules connect your ControlLogix, CompactLogix, SLC-500, and PLC-5 PLCs together and connect PLCs to Ethernet field devices. These industrial networking modules are built-for-purpose OT solutions for control engineers. For example, the networking modules come with no configuration software so you can support your PLC and device networking without complicated setup and configuration. The redundant fiber backbone between modules provides maximum network reliability and uptime. The in-chassis modules support Ethernet protocols such as PROFINET, Ethernet/IP, and Modbus TCP/IP all at the same time. Boot up time is about 10 seconds, and if a fiber fails, there is 0 convergence time to failover to the redundant fiber. Gone is the complicated setup required for redundant networking using IT based switches.
eATM OPC UA Server
ControlLogix OPC UA Server Module
The eATM® (Enterprise Appliance Transaction Module) OPC UA Server enables the connection of local ControlLogix to OPC UA clients.
cATM®
Connect ControlLogix to ABB Bailey INFI90/Net90
cATM® Controller Appliance Transaction modules enable data transfer between ControlLogix and most Allen-Bradley PAC/PLCS.
Network Cards
Cards with extended temperature range (>70 deg C) to connect computers and industrial terminals to networks such as ControlNet and EtherNet/IP.
High-temperature PCI network cards
The PCI ControlNet is an extended temperature version of the 1784-PCIC ControlNet Card. It supports redundant media and can be run continuously in a 90°C environment.
High-temperature network card for PCI Express (PCIe)
The high temp PCI Express card with redundant media support for ControlNet was specifically designed for use in Allen-Bradley 6181 Integrated Industrial Computers with PCI Express (PCIe) bus slots.
Network Test Tools
Cable certifiers allow installers and control engineers to quickly analyze and troubleshoot their Ethernet cabling installations. Softing's most advanced certifier, the WireXpert 4500 tests systems to the highest levels quickly and easily and includes options for various types of media and connectors.
WireXpert Cable Certifier
WireXpert 4500 is the ideal measurement tool for the certification of Industrial Ethernet network cabling up to 2500 MHz. With its RJ45 and M12 D-coded connection kits, it supports the most widely used industrial connector types.
NetXpert Cable Qualifier
NetXpert XG2 is a cable tester and network LAN manager in one handheld test tool. NetXpert XG2 provides a complete solution for cable testing, performance analysis, and troubleshooting of Industrial Ethernet networks, enabling rapid, simple verification and documentation of copper, fiber, RJ45 and M12 connectors.
LinkXpert Cable Verifier and Network Troubleshooter
Copper testing, PoE, fiber, Wi-Fi, and network testing - in your pocket! LinkXpert M3 is a simple cable wiremapping tool and powerful network troubleshooting tool for datacomm and industrial applications.
Industrial USB and Bluetooth Modems
USB & Bluetooth Modems enable computers, tablets & smart phones to access various protocols & physical layers. Our products enable parameterization, commissioning & maintenance of field devices through plug & play solutions or comprehensible APIs. They provide flexibility & are suitable for use in hazardous areas.
Mobile Interface for HART, FOUNDATION fieldbus, PROFIBUS PA
Bluetooth and USB solution for commissioning parameterization & maintenance for field devices
dataFEED OPC UA / OPC Classic SDKs
Enable your application with OPC UA or OPC Classic. Using dataFEED OPC SDKs from Softing allows software designers to concentrate on his/her project goal and not on learning the intricacies of the underlying OPC UA technology.
OPC UA and OPC Classic for Developers
Embed OPC UA and OPC Classic communications in the products you are developing using the Softing dataFEED OPC SDKs.
IIoT Gateway connecting to legacy networks, enabling Industry 4.0 connectivity
Connection of PROFIBUS and HART devices to HART IP, OPC UA, MQTT and FDT/DTM.
smartLink HW-DP provides PLC independent access to PROFIBUS DP Networks. It enables Plant Asset Management for field devices using standard industry tools and allows using HART IP as a standardized format. smartLink HW-DP is a compact tool that can be integrated without interfering with the operation of existing installations. Thus, it enables Industry 4.0 connectivity for new and existing PROFIBUS DP networks.
Hart Multiplexer Software to Access Configuration & Diagnostics Data
Interface software to access HART devices from Emerson’s AMS and other HART-IP enabled applications.
smartLink SW-HT is a HART multiplexer that provides a simple and fast access to HART field devices without additional hardware. It is a software interface solution for HART devices connected to Allen-Bradley or Schneider Electric HART IO modules. The integrated HART-IP server enables transparent access to the HART devices.
smartLink SW-HT enables remote asset management, device configuration and monitoring. It allows to access device identification, health, diagnostics, and process data.
Softing Inc.
+1.865.251-5252