Designed for Enterprise-to-Controller or Controller-to-Controller data exchange. Set-up of tag/array data transfer is done graphically via configuration software. Once completed, the modules alone handle all data exchange - no other software is required.
tManager® Enterprise Appliance Transaction Modules (eATM®) enable bi-directional data exchange between enterprise databases like Microsoft SQL and CompactLogix PLCs.
tManager® Enterprise Appliance Transaction Modules (eATM®) enable bi-directional data exchange between enterprise systems like Microsoft SQL databases and ControlLogix PLCs. tManager is the preferred PLC in-chassis hardware connectivity solution as compared to PC software-based connectivity solutions such as VB scripting and FactoryTalk Transaction Manager.
The Phoenix Digital OCR is a DIN rail mount module that connects your Ethernet PLCs together and connects PLCs to Ethernet field devices. This industrial networking module is a built-for-purpose OT solution for control engineers. For example, the networking module comes with no configuration software so you can support your PLC and device networking without complicated setup and configuration. The OCR has a redundant fiber backbone for maximum network reliability and uptime. The OCR module supports Ethernet protocols such as PROFINET, Ethernet/IP, and Modbus TCP/IP all at the same time. Boot up time is about 10 seconds, and if a fiber fails, there is 0 convergence time to failover to the redundant fiber. Gone is the complicated setup required for redundant networking using IT based switches.
These Phoenix Digital in-chassis modules connect your ControlLogix, CompactLogix, SLC-500, and PLC-5 PLCs together and connect PLCs to Ethernet field devices. These industrial networking modules are built-for-purpose OT solutions for control engineers. For example, the networking modules come with no configuration software so you can support your PLC and device networking without complicated setup and configuration. The redundant fiber backbone between modules provides maximum network reliability and uptime. The in-chassis modules support Ethernet protocols such as PROFINET, Ethernet/IP, and Modbus TCP/IP all at the same time. Boot up time is about 10 seconds, and if a fiber fails, there is 0 convergence time to failover to the redundant fiber. Gone is the complicated setup required for redundant networking using IT based switches.
The eATM® (Enterprise Appliance Transaction Module) OPC UA Server enables the connection of local ControlLogix to OPC UA clients.
Cards with extended temperature range (>70 deg C) to connect computers and industrial terminals to networks such as ControlNet and EtherNet/IP.
The PCI ControlNet is an extended temperature version of the 1784-PCIC ControlNet Card. It supports redundant media and can be run continuously in a 90°C environment.
The high temp PCI Express card with redundant media support for ControlNet was specifically designed for use in Allen-Bradley 6181 Integrated Industrial Computers with PCI Express (PCIe) bus slots.
Cable certifiers allow installers and control engineers to quickly analyze and troubleshoot their Ethernet cabling installations. Softing's most advanced certifier, the WireXpert 4500 tests systems to the highest levels quickly and easily and includes options for various types of media and connectors.
WireXpert 4500 is the ideal measurement tool for the certification of Industrial Ethernet network cabling up to 2500 MHz. With its RJ45 and M12 D-coded connection kits, it supports the most widely used industrial connector types.
NetXpert XG is a cable tester and network LAN manager in one handheld test tool. NetXpert XG provides a complete solution for cable testing, performance analysis, and troubleshooting of Industrial Ethernet networks, enabling rapid, simple verification and documentation of copper, fiber, RJ45 and M12 connectors.
Softing 1799 Embedded I/O modules offer an off-the-shelf solution for OEM machinery and conveyor applications. These board-level products allow you to buy just what is needed for an optimum I/O system connected via DeviceNet.
Softing 1799 Embedded I/O modules offer an off-the-shelf solution for OEM machinery and conveyor applications.
USB & Bluetooth Modems enable computers, tablets & smart phones to access various protocols & physical layers. Our products enable parameterization, commissioning & maintenance of field devices through plug & play solutions or comprehensible APIs. They provide flexibility & are suitable for use in hazardous areas.
Bluetooth and USB solution for commissioning parameterization & maintenance for field devices
Enable your application with OPC UA or OPC Classic. Using dataFEED OPC SDKs from Softing allows software designers to concentrate on his/her project goal and not on learning the intricacies of the underlying OPC UA technology.
Embed OPC UA and OPC Classic communications in the products you are developing using the Softing dataFEED OPC SDKs.
smartLink HW-DP provides PLC independent access to PROFIBUS DP Networks. It enables Plant Asset Management for field devices using standard industry tools and allows using HART IP as a standardized format. smartLink HW-DP is a compact tool that can be integrated without interfering with the operation of existing installations. Thus, it enables Industry 4.0 connectivity for new and existing PROFIBUS DP networks.
smartLink SW-HT is a HART multiplexer that provides a simple and fast access to HART field devices without additional hardware. It is a software interface solution for HART devices connected to Allen-Bradley or Schneider Electric HART IO modules. The integrated HART-IP server enables transparent access to the HART devices.
smartLink SW-HT enables remote asset management, device configuration and monitoring. It allows to access device identification, health, diagnostics, and process data.