Modbus TCP/FF HSE to FF H1 Gateway

Direct FF H1 segment integration - Modbus TCP control systems or FF HSE asset management applications

With Softing’s FG-200, it is possible to integrate up to four FOUNDATION™ Fieldbus (FF) H1 links into control systems supporting Modbus TCP or into FF asset management applications. The FG-200 provides redundancy and is suitable for use in hazardous areas. This device features fast access to process data, while making use of FF advantages like reduced cabling, central field device parameterization, comprehensive diagnostics, or intrinsically safe device segments.

in the data sheet

Device Connectivity brochure

FG-200 | Integration of up to 4 FF H1 segments into control systems via Modbus TCP or FOUNDATION Fieldbus HSE

Overview

Integration of FF-H1 devices into Modbus TCP control systems

Parallel support of up to 4 FF-H1 channels, each for max. 16 field devices
Fast access to process data
Suitable for use in hazardous areas
FF Configuration Tool for easy commissioning

Access to FF H1 devices from plant asset management applications

Visitor mode for avoiding interference with network behavior
FF HSE interface for EDD based applications like Emerson’s AMS Device Manager (< V14.5)
DTM for FDT applications like PACTware, Yokogawa FieldMate, Honeywell FDM, E+H FieldCare

High availability

Redundancy link enabling device redundancy (D-3 according to FF-593)
Automatic mirroring of configuration data
Very fast redundancy switchover

The FG-200 is the successor product of FG-110.

End of Life Announcement FG-110.

Technical Data

FG-200
Hardware	Processor	Altera Cyclone V SoC with dual-core ARM Cortex-A9
	Status LEDs (Gateway)	PWR (power supply), RUN (operation), ERR (error), RDL (redundancy link)
	Status LEDs (Fieldbus)	FF H1 activity per link
Interfaces and Connectors	Ethernet	2 * IEEE 802.3 100BASE-TX / 10BASE-T (only ETH1 supported) Connectors: RJ45
	Fundation Fieldbus H1	4 FF H1 links, compliant to type 114 of FF physical layer profile (each link capable to operate independently as Link Master and/or Time Master) Transfer rate: 31.25 Kbit/s Fieldbus voltage range: 9 VDC ... 32 VDC, preferred voltage: 24 VDC Current consumption: 10 mA / link Connectors: 3-position screw connection, galvanically isolated
Physical Properties	Dimensions (H x W x D)	100 mm x 35 mm x 105 mm
	Weight	Approx. 250 g
	Power Supply	18 VDC ... 32 VDC; SELV/PELV power supply mandatory; Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on) No power supply to FF H1 links through FG-200 HSE/FF Modbus
	Operating / Storage Temperature	-40 °C .. +70 °C / -40 °C .. +85 °C (see detailed mounting description in user manual)
	Relative Humidity	10 % ... 95 %, non-condensing
	Cooling	Convection, no fan
	Coating	Conformal coating based on ANSI / ISA-S71.04 G3
	Mounting	DIN rail 35 mm
	Protection Class	IP20
Software	Protocols	FOUNDATION Fieldbus H1, FOUNDATION Fieldbus HSE, Modbus TCP
	Redundancy	Device redundancy compliant to type D-3 according to specification FF-593
Conformity / Certifications	CE	EN61000-6-2, EN61000-6-4, EN55022 Limit Class A, EN55011
	Electromagnetic Compatibility (EMC)	FCC CRF47, Part 15 Section 15.107 and 15.109 (Class A), VCCI Class A Information Technology Equipment 2002
	Vibration / Shock	DIN EN 60068-2-6 Vibration / DIN EN 60068-2-27 Schock
	Hazardous Location Certifications	cULus: Class 1, Division 2, Groups A, B, C, D IECEx: Ex ec [ic] IIC T4 Gc ATEX: Ex II 3G ec [ic] IIC T4 Gc

Order Information

Scope of Delivery
Hardware	FG-200
Software	Download from the Softing website: Firmware, FF Configuration Tool, FF-DTM
Documentation	Quick Startup Guide, User Manual

Order Numbers
GLA-EK-024102	FG-200
ACA-ZZ-020631	Redundancy Link (3-pole), Cable (30 cm) for connecting redundant pairs of FG-200

Additional products and services
Installation solutions	When using the high-power trunk topology or FISCO, we offer in cooperation with R.Stahl, fieldbus infrastructure components with PROFIBUS PA and FOUNDATION fieldbus H1 – this ranges from power supply, physical layer diagnostics and field device couplers to termination resistors.