Industrial

Interface for testing PROFIBUS Networks with M12 Connectors

Interface for testing PROFIBUS Networks With M12 Connectors

Interface for providing an access point to test PROFIBUS networks with M12 Connectors

  • Provides an access point for testing PROFIBUS networks with M12 connectors.
  • Allows Testing the Bus During Operation

Application

The service interface is inserted between two bus stations. When not in use, the service output


of the T piece is closed with an end cap. At baud rates of 1.5 Mbit/s or higher, use the supplied cable to ensure that the required minimum distance between bus stations is maintained. See figure (middle) for application example.

Included in Package

  • T piece (protection class IP68) with end cap and a 1 m DP cable fitted with a male/female M12 connector on each end.