Softing extends diagnostics and commissioning of PROFINET industrial networks
As an enhanced version of the commissioning and diagnostics tool Analyzer IE, Analyzer PRO includes a TAP (Terminal Access Point) device called “profiTap”. profiTap records network communication such as jitter, load ratio and device update rate. These so-called passive parameters cannot be determined via actively communicating to devices. With the help of profiTap, all packets traveling to and from the controller are analyzed and network communication is recorded. Eventually, the parameters are integrated in the acceptance report and add an additional layer of information which provides more detailed insights into the PROFINET network.
Analyzer PRO is the combination of Softing’s products TH SCOPE software and TH LINK PC. It monitors and diagnoses the health of industrial networks so that field devices continue to communicate with PLCs which would otherwise cause plant downtime or outages. The generated acceptance reports correspond to the recommendations of the "PROFINET Commissioning Guideline" from PROFIBUS & PROFINET International (PI). Analyzer PRO is tailored to the needs of maintenance and production operations and requires no IT or network expertise on the part of the user. In addition to the PROFINET standard, EtherNet/IP and Modbus TCP are also supported. Analyzer PRO is available for download under the following link:
Visit Softing at SPS IPC Drives in Nuremberg, November 27 to 29, 2018, Hall 5, Booth 260.
Word count: approx. 280
No. of characters: approx. 1,885