Industrial

PROFINET Gateway for Asset Management

Access PROFINET networks via FDI and OPC UA

smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

smartLink HW-PN can be used for asset management, device configuration and monitoring.

Overview

Parameterization and Asset Management

  • Independent of PROFINET engineering tools
  • Centralized and time-saving asset management of PROFINET networks with PROFINET and PROFIBUS field devices directly from the control room

Ethernet Access Point to PROFINET networks

  • Provides 2nd channel to access the field devices
  • Acts as a PROFINET supervisor
  • Is part of one PROFINET network
  • Integrated 2-port switch for use in line or ring network topologies

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFINET networks without requiring modification
  • Access to acyclic data via FDI communication server (OPC UA)

Asset Management and Parameterization of PROFINET Devices

Parameterization and Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Asset Management and Parameterization of PROFIBUS Devices

Parameterization and Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
Inexpensive and low-risk Integration
  • Connection of PROFIBUS devices without additional hardware
  • Use of existing infrastructure using the PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices
Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Technical Data

smartLink HW-PN
Hardware Processor Altera Cyclone V SoC with dual-core ARM Cortex-A9
  Status LEDs (Gateway) PWR, RUN, ERR, BUS
  Real-Time Clock Real-Time clock with buffering, setting the time via browser or by NTP server
(buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces Ethernet 1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
  PROFINET 2 x IEEE802.3 10BASE-T/100BASE-TX, Connector: RJ45; Embedded PROFINET 2-port switch for line or ring topology
Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
Supported Communication Protocols PROFINET, PROFIBUS
  PROFINET/PROFIBUS Proxies Softing:
pnGate DP, pnGate PA
aplSwitch Field PA
Physical Properties Dimensions (H x W x D) 120 mm x 28 mm x 110 mm
  Weight Approx. 430g
  Power Supply 18 VDC ... 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
  Typical Power Loss 5 W
  Operating Temperature -40 °C ... +65 °C (see detailed mounting description in user manual)
  Storage Temperature -40 °C ... +85 °C
  Relative Humidity 10 % ... 95 %, non-condensing
  Cooling Convection, no fan
  Mounting DIN rail 35 mm
  Protection Class IP20
Conformity / Standards CE Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS)
EN 61000-6-2 Generic standards - Immunity standard for industrial environments
EN 61000-6-4 Generic standards - Emission standard for industrial environments
EN 55032 Electromagnetic compatibility of multimedia equipment - Emission Requirements Class A
EN 55011 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics –
Limits and methods of measurement Class A
EN 50581:2012/EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
  FCC FCC 47 CFR Part 15B Section 15.109 (Class A)
  VCCI VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015

Order Information

Scope of Delivery  
Hardware smartLink HW-PN
Documentation User Guide as PDF download
Order Numbers  
GEA-YA-026010 smartLink HW-PN
LRA-AA-027003 smartPlus PN, License access to one field device
x

Softing Industrial

Worldwide

+49 89 456 56-340


Callback Service

USA, Canada and Mexico

+1 865 251-5252


Callback Service


x
«